usually the plastic switch inside the steering column that the key barrel engages with
common fault as described and inexpensive part to replace
Yes , have had dealings with Peter and he is so close to retiring that he works a four day week with Fridays off.
He loves to build an engine and...
Its a Low Light so a 1600 would be going back in, I would suggest going to see Peter Murfett and drop the car off , exchange the required...
History will reveal that knock is a big end. where about in Tas are you?
Spray some aerostart or similar around the sealing area at base of the carb and the rubber boots on the inlet manifold to see if the idle picks up...
I have one somewhere.......... I will try and find it tomorrow
I go 6 thou with tappets on dead cold engine
centres have to be true for fitting on the wheel balancing machine
Consider you might need to get the centres bored to fit front hub?
I would be checking the rubber elbows at the base of the carbies and then the brake booster line
Looks like a speedy sleeve is already on it in the pictures? carefully get it off and put another on
my local engineering supplier had a promotion on the Milwaukee brand electric grease gun including 2 batteries and charger with 1/2 " drive...
shock absorber rubber
EMPI 98-1293-B offset
Separate names with a comma.