1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Comments on Profile Post by Alex Peever

  1. nils
    nils
    G'day Alex, if your rears have been rebuilt recently you won't get a better stop out of going discs on the rear. Your front brakes do a whole lot more work. I do have a couple of sets of brackets here but I am in no position to offer kits right now. What size wheels do you have?
    Jul 4, 2019
  2. Alex Peever
    Alex Peever
    That makes sense. Last time I measured my front discs they were 12.5mm.

    I'd be interested in anything you had to offer for the fronts since they're untouched and due for a haul over. I'm running Merc 16s
    Jul 6, 2019
  3. nils
    nils
    Hi again Alex, I didn't get a chance to snap some photos during the weekend.
    What you will need is an old set of stock rotors to cut into a hub, the calipers from a passat (will find more details for you) standard late model audi 312mm rotors and some custom brake hoses.
    Jul 8, 2019
  4. Alex Peever
    Alex Peever
    Hi Mike,
    I'll get to working on the 312mm rotors, the brake hoses I can make up myself. Do the old rotors for cutting into have to be any year/model. Could I just get some from a 2wd? Thanks Nils!
    Jul 8, 2019
  5. nils
    nils
    I will send you a PM with part numbers and photos in the next day or 2
    Jul 9, 2019
  6. Alex Peever
    Alex Peever
    Thanks Nils! You're a legend and a half
    Jul 9, 2019