Yes I’ve spoken to Mike seems like a nice honest bloke
Just thought I’d show off my case damage for a few opinions
All other parts crank,cam,heads etc will go to my old mate VW mechanic to...
Cheers I think its right
But conformation would be good
No I was clutching at straws with the tank outlet thing because as I’ve said I drain the tank way back before putting any fresh fuel in
I will let you know
That’s why I’m going with 10 more litres and if I get good flow will just swap around
Only need to get fuel all over we once as that’s always a treat
So the way it is now is correct or is it possible it’s arse about that could be the problem
Will definitely stick 10 more litres in tomorrow and see...
Yeah but there’s 2 in the photo one forward facing and one back facing
One drain one outlet I’m thinking is this a reasonable train of thought
Have done that
Just done that again
This might be a really stupid thing to ask but is it possible the 2 tank outlets only one picks up from the...
Ok just connected hose from pump outlet had wife wind over pumped fuel into jar at the start then stopped looked over to see filter...
When I checked fuel pressure there was 4.5 psi from pump
Does the pump draw from tank ?
Or is it gravity feed?
I don’t get why I don’t get consistent...
Not getting fuel to pump via the set up in photos
Been working through all of the surgestions regarding timing, sync,etc
But can’t do anything if not getting enough fuel from tank that’s the issue...
Not wanting to start a debate but to be honest I think it’s probably safer where it is
And you’re right that’s not the issue
Glad to argue the...
Photo for previous message
Still have fuel issues
As I mentioned in my original post
Started working through the surgestions all ready put forward but
Started running rough...
Dizzy is a SVDA Accuspark best I could do at the time
Will try the for mentioned advance to 32 and do the plug lead checks recheck linkage...
Idle timing about 7
3000 is about 28ish
Idle 850 ish
To quote Pauline
Yep that’s the meter I’ll try and get it as low as I can
Will spend a lot more time on linkage to get same same
Plugs are all new and set will check...
Separate names with a comma.