Well it was a Golf.
I thought the electric PS was a good idea except it requires a modification to the steering shaft and technically this would require an engineer's...
I got the answer I wanted today through the engineer I had certify my syncro modifications last year.
I asked him about the GVM upgrade.
Yes, I'm familiar with a GVM upgrade requirements, been there, got the T-shirt - not VW's but others.
I was curious as to see if some had done so?
Not sure what you mean re weighed ? I know what my syncro weighs and that's the problem.
If I were to be a law abiding motorist then my van is...
I've had a search here through this forum, cannot see any discussion on this subject?
Has anyone done a GVM upgrade?
I got my interior parts from Kevin at camper interiors (UK)
Nice to deal with.
This is easy fixed.
Join the CMCA, cost $62 membership.
You then have access to the club insurance.
After valuation I have my 1990...
Just put these on my T3
Would it fit a T2?
Syncro with out locking diff.
First off, look at the diff case, does it have a blank diff lock casting port?
If not then the whole monty will need...
The latest Victorian one Phil links to looks good.
It would still be interesting to compare the two.
Especially the presence of a diff lock?
And its not a ex telstra unit.
With PS and a rear diff lock. Worthy options.
If the vehicle has little or no rust then its...
I removed all of the wiper gizmo paraphernalia from syncro back hatch and welded all holes shut.
Parts are available if anyone wants them .not sure...
Hey I've had Vee Dubs my whole life since before I even had a licence to drive.
And I have a real passion for a nice vehicle regardless of make....
Not just my opinion , but I know a few really good auto electricians and they say the same thing.
Just for example - look at any Toyota or Subaru...
Should be easy to fix.
Possibly caused from cable wearing around near the bellhousing.
Do a few photo's maybe.
VW wiring is not renown for high...
What engine are you using?
Your T3 is a standard T3.
Moving the transaxle in your T3 is relatively easy
But I'd check both master and slave cylinder first....
Agree with previous comment.
Uwe in Melbourne makes a new replacement shaft . Affordable . And they work.
For those with a syncro
An interesting thread from the Samba.
A look at the real value of using or not using a Decoupler....
Separate names with a comma.