She has too much faith in specialists.;)
Yep. Fix is fine and it's worth having the mechanic give it the once over as well to check for any other lurking issues.
Highest point on cam is when you set points gap.
Trust dwell rather than manual setting with feeler gauges.
50 is setting for new points.
Will make her happy.
Most certainly dodgy wires can cause a problem.
May be only a few strands doing all the work.
And that doesn't work well ;)
Fix obvious stuff first.
Don't know the system but seems fine.
I've been out of the game for a while now.
Unless you have used HVLP previously and happy with it stick to a...
The tinters in original probably included
' Prussian blue'.
It really did have a crap purple cast if viewed along the panel or poor clear used....
Centre of roof doesn't have much , if any suction.
Low pressure is front metre or so as air accelerates over edge above windscreen.
And a small area...
That one goes from IGN wire to starter solenoid.
Same issue of voltage drop thru worn IGN switch.
At least it has a bigger wire standard.
Won't even have time for the air con to get the heat out :eek:
$50 note passed underhand.
Secret still to seperate the alcohol ,Eh ?
Years of faithful service then on limited rations just because of a bit of incontinence :(
You wait till it's your turn to go in a nursing home :eek:
Have a squiz thru this.
I have. ;)
Ensuring best avail spark untill I can afford a good electronic unit.
Ensuring full voltage while cranking to start on lpg.
Even if you found a yank spec there prob wouldn't be a formula compatible with local tinters.
Suitable sika has better strength than screws with caveat of impeccable surface prep and sound paint.
Can't say what would be acceptable if an...
Pays to clean them as they can have a protective layer.
I use thinners or fine sandpaper.
Ensure you have greased cam on dissy as well.
Hopefuly earlier steering wheel crosses over ok.
Have you come across any info on that?
Separate names with a comma.