Can anyone suggest a suplier for a oil pump for a 2.1ltr T3 wasserboxer?
Im needing it this week coz ive got the buzzer of doom happening . I can...
Im getting keen for this 2.5ltr subi conversion myself.
I just spoke with him and he seems real nice.
Only positive feedback on his work found...
That a bit of a shame that it cant be done insitue.
Lucky lucky, re bodgy hatch making!!
Ive been involved in a 'close call' when a mate was cutting...
Just a quickie, Does anyone know if it is possible to remove fan housing to inspect oil cooler in a 1972 Doublecab with a 1600 twin port...
Thankyou all for your tdi experience and info sharing.
Ok thankyou for the maths lesson but what i am really trying to ask is how many kilometers other people are getting out of their T4 tdi engines...
Manual and yes 2.5litre.
I am looking for some feedback from T4 tdi owners.
Im looking at a 1999 one with 300,000km
What should i expect the motor to be good for?
well if they have bigger valves then im guessing that they would improve flow therfore a power increase!!
Ill start my search.
Just a quicky,
Ive been told that 1800 heads fit on 2000 engines.
Do they fit straight on?
Does everythig eg manifolds exhast etc fit straight up?...
Thats one seriously damaged valve and adjuster.
Ill be checking my valves and adjusters asap, then if ok setting then as in Bently,
with #1 at tdc...
There is a small black box on the inside left of the engine bay(when standing at the back looking forward) with two relays in there
have you checked...
All this noisy tappet issue sounds familiar.
Ive tried at least two oil flushes on my past two oil changes to try help calm the situation but to no...
I was pointed in your direction as it was thought you might have been wrecking a t3.
I am looking for a AirflowMeter for a T3 2.l ltr...
That looks good,
Ill check it out and do some testing.
Thanks for that video.
I have moved the board just enough to hopefully give a better connection.
Once the screws were loosened there was enough slop...
So if it is one of two oil pressure senders it sounds like it will not be affecting my air fuel mixture.
Next option here i come.
I did the capacitor mod and it didn't fix my problem. My initial issue was the temp II sensor.
My issue now seems to be an overly worn...
I have discovered that i have lost valve clearance on inlet valve #3 cylinder. (for a second time after only 1hr drive and being set by mechanic as i...
I changed pushrod tubes and adjusted valve clearances .15mm cold and installed new plugs .7mm gap and set points 0.4mm and camper ran better...
Separate names with a comma.