A few of these fellas digging for lunch in huskisson[ATTACH]
Hi Justin ... have you checked what happens on the gauge when you manually move the float? Patrick
Could just be the reverse lockout plate under the gearstick needing to be adjusted...similarly the clutch cable ... a new nylon bush on the shaft...
Hi Ian. Even if there were fumes getting in the engine compartment ... I don't know of a path from there into the van ( you've blocked the heater...
Hi Ian ... Screw to hold Venturi. Patrick
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
yep, if you've removed the heat exchangers, it's no use wasting this cooling air
spotted out and about (in Zeitschrift)
Hi Jon, yep 205P is good. Patrick
remember one of your previous threads...
it's a vacuum hose that connects to the balance tube around about under the air filter in middle of the engine compartment
Hi Jon - sounds like a fair idea. It'd probably be the mountings on the floor that would be of interest to an engineer. Probably worth starting a...
lesson was - don't go back a second time
Hi Jon, it depends what the rest of your layout will be.
If you have a full width bed/seat there's a limit to how far down the wall your cupboard...
good pick up Jon. I was thinking there should be quite a few up around your way
Separate names with a comma.