1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Bay front door removal

Discussion in 'Body' started by Blunderbus, Apr 13, 2018.

  1. Blunderbus

    Blunderbus Active Member

    Messages:
    547
    Location:
    St Helena, Melbourne .
    I dont have a manual handy and i cant see how to remove the front doors, undone all the allen bolts but the spring thingy is holding it on ?
     
  2. rstucke

    rstucke Well-Known Member

    Messages:
    599
    Location:
    Wamberal NSW AUS
    can't remove the pin?
     
  3. Blunderbus

    Blunderbus Active Member

    Messages:
    547
    Location:
    St Helena, Melbourne .
    Wasn't sure it was removable, better have a better look.
     
  4. cbus

    cbus Well-Known Member

    Messages:
    10,786
    Location:
    sunshine coast
    Might help.
    Don't get a sore neck while you hold the door. :)
     
  5. rstucke

    rstucke Well-Known Member

    Messages:
    599
    Location:
    Wamberal NSW AUS
    there's a clip on the pin (underneath). Take the pin out before undoing the hinges
     
  6. Blunderbus

    Blunderbus Active Member

    Messages:
    547
    Location:
    St Helena, Melbourne .
    I thought i felt a circlip but it just lifted out.
     
  7. Wayne murray

    Wayne murray Well-Known Member

    Messages:
    1,764
    Location:
    Seven hills
    rstucke is right there is normally a E clip (which normally fly's off if not careful) on the underside of the pin which has a groove around it.Take it the door is now off.:)
     
    Last edited by a moderator: Apr 15, 2018
  8. Blunderbus

    Blunderbus Active Member

    Messages:
    547
    Location:
    St Helena, Melbourne .
    Yeah was off so i could weld in a patch to the step but back on as it bucketed down in the arvo.
     

Share This Page