1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Break Light on

Discussion in 'T3 & T4 Tech Help Clinic' started by rowansnow, May 8, 2017.

  1. rowansnow

    rowansnow Member

    Messages:
    70
    Location:
    Australia
    Hi,

    Noticed the Break Light was flickering on and off.

    Now it remains on during operation. Breaks are working just fine.

    Any Ideas?

    Cheers

    Rowan
     
  2. Barry

    Barry Well-Known Member

    Messages:
    6,184
    Location:
    Abbotsford NSW
    my guess is a faulty brake pressure switch

    If you disconnect the the 2 wires going to the switch and tap them together and the brake lights go on and off - then you have found your problem
     
    syncro, Syncro27 and Grantus like this.
  3. hdj80

    hdj80 Member

    Messages:
    99
    Location:
    Canberra
    Brake Fluid Level Low? I know my Landcruisers Brake light in the dash would come on and stay on if level was low..
     
  4. saabman

    saabman Well-Known Member

    Messages:
    4,888
    Location:
    Goulburn
    Are you talking about the brake lights or the B light on the dash?
     
  5. rowansnow

    rowansnow Member

    Messages:
    70
    Location:
    Australia
    Thanks for the replies, good Kombi folk..

    After re-reading it became clear that
    my post was slightly ambiguous so apologies!

    The Dashboard Light came on. o_O

    Took it to the mechanic and break fluid level was low
    Found leak at left rear wheel.
    :rolleyes:
    Booked in for required surgery on Thurs morning..

    Cheers
     

Share This Page