1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Fuel breather to canister

Discussion in 'Fuel System & Electrics' started by Ignats, Dec 10, 2017.

  1. Ignats

    Ignats Member

    Messages:
    49
    Location:
    Merimbula
    Looking for some advice on what to do with breather set up as my 76 bus has a 1600 type 1 and I have no charcoal canister what should I do with the end of the breather set up that would normally go to the canister I have twin carbs on her.Hence my next question I noticed today when checking out other things that my vacuum for brakes is not hooked up either twin carbs coming into play again
    What's the best way to achieve vacuum.
    Thanks to everyone who has helped me so far this is a great site
    Cheers
     
  2. Barry

    Barry Well-Known Member

    Messages:
    2,697
    Location:
    Abbotsford NSW
    leave it
     
  3. Barry

    Barry Well-Known Member

    Messages:
    2,697
    Location:
    Abbotsford NSW
    Drill and tap one of the manifolds would be my suggestion - but I have never done this to hook up do a brake booster
     

Share This Page