Fuel Filler Hose

Discussion in 'Fuel System & Electrics' started by Alpal, Jan 19, 2018.

  1. Alpal

    Alpal Moderator Staff Member

    Messages:
    8,196
    Location:
    Melbourne Bend of Islands
    Engine out so time to check fuel lines/filler hose. Fuel tank out. Flange rubber and hose kaput. Flange rubber easy but where can I get other bit of filler hose?
    DSC00678.JPG DSC00677.JPG
     
  2. KahunaKombi

    KahunaKombi Super Moderator Staff Member

    Messages:
    17,696
    Location:
    Bracken Ridge, Qld
    I put a post up in reply to your post in Off Topic ;)
     
  3. rstucke

    rstucke Well-Known Member

    Messages:
    459
    Location:
    Wamberal NSW AUS
    I've got both for you if you want them.
    I bought a 1mtr length of the correct size filler hose (no choice), cost an arm and a leg. I can cut you off any length you want.
    I also bought 2 of the flange type elbows by mistake
    PM me if your interested (they'll be cheap)
     
    David H, cbus and Grantus like this.
  4. Alpal

    Alpal Moderator Staff Member

    Messages:
    8,196
    Location:
    Melbourne Bend of Islands
    Nah! My beast has filler flange, metal section, short (115mm) rubber joiner to connect to tank. Last bit is what I need. Flange bit is readily available.
     
  5. Alpal

    Alpal Moderator Staff Member

    Messages:
    8,196
    Location:
    Melbourne Bend of Islands
    Have flange item already ordered. Was going to get a length and offload extra to help others. Message me details, length and cost please.
     
  6. rstucke

    rstucke Well-Known Member

    Messages:
    459
    Location:
    Wamberal NSW AUS
    pm me your address I'll send you about 200mm that you can cut to size.
    $10 should cover it and the postage.
     
    Sahara Hilton, David H and Grantus like this.
  7. Grantus

    Grantus Well-Known Member

    Messages:
    13,816
    Location:
    Southern ACT
    Love the Kombi Club spirit, to help others where needed. :) Well done! :cool:
     
    oldman likes this.
  8. Alpal

    Alpal Moderator Staff Member

    Messages:
    8,196
    Location:
    Melbourne Bend of Islands
    You the man. Message sent!
     
  9. KahunaKombi

    KahunaKombi Super Moderator Staff Member

    Messages:
    17,696
    Location:
    Bracken Ridge, Qld
    Good to see sorted :cool:
     
  10. rstucke

    rstucke Well-Known Member

    Messages:
    459
    Location:
    Wamberal NSW AUS
    I'm sending you a piece off this hose
    P1230040.JPG
     
    David H and KahunaKombi like this.
  11. Alpal

    Alpal Moderator Staff Member

    Messages:
    8,196
    Location:
    Melbourne Bend of Islands
    Thanks to all who responded and special thanks to Rick.
    New flange rubber received today. Will refit tank with all new hose and breather connections. Hopefully no more fuel smells!
    Just need to fix rust damage to battery tray then put tank back. Then finish engine rebuild etc etc. Stanthorpe will be a good test run.
     

Share This Page