1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Highbeam switch/problems

Discussion in 'Fuel System & Electrics' started by Chandels, Nov 16, 2009.

  1. Chandels

    Chandels New Member

    Messages:
    8
    Location:
    Perth
    Ok so the problem at the moment seems to be that when you flick the indicator stalk up (Highbeams) the relay wont stay on. Like the highbeams turn on then turn off when the stalk goes down. I have replaced the relay with another second hand one which i hope is working. What normal problems are their in the highbeams like what could cause this fault?
     
  2. jae

    jae New Member

    Messages:
    363
    Location:
    Ashgrove, Brisbane
    I had that exact problem a month or so ago, turned out to be the relay.
     
  3. Chandels

    Chandels New Member

    Messages:
    8
    Location:
    Perth
    oh dang fair enough il go talk to the guy i brought it off then
     

Share This Page