1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Ignition switch wiring plug

Discussion in 'Bay Tech Clinic' started by Klaus Schroeder, Sep 29, 2021.

  1. Klaus Schroeder

    Klaus Schroeder Member

    Messages:
    61
    Location:
    Victoria
    Hi All,
    Is there a separate ignition switch wiring plug that that connects to the rear of the ignition switch that can be purchased instead of buying a wiring loom. My wires to the ignition switch are individually connected and one always pops out so therefore applying tape to hold in place. Hence the purchase of a plug, but I don`t won`t to buy a whole loom.

    Any thoughts does someone have one for sale?

    Regards Klaus
     
  2. Wayne murray

    Wayne murray Well-Known Member

    Messages:
    4,666
    Location:
    Seven hills
    Post 8/ 74 have a plug on it's own to which a plug with wires push into the back of the ignition switch.
    Pre 8/74 the plug has a length of wires they are coming out the back of the ignition switch which then under the dash their is a terminal with 4 wires or t5 connector. The wires are soldiered on to the back of the ignition switch. They then goes to wherever they need to go.
    Both plugs are held in with a little screw.
     
    grumble and Grantus like this.
  3. Kai

    Kai Well-Known Member

    Messages:
    4,793
    Location:
    Sydney, NSW
    What year model do you have as I may be able to assist
     
  4. Klaus Schroeder

    Klaus Schroeder Member

    Messages:
    61
    Location:
    Victoria
    Thanks Wayne, again much appreciate your assistance
     

Share This Page