Malcolm Engineering

Discussion in 'Off Topic' started by kool_kombi 79, Aug 6, 2017.

  1. kool_kombi 79

    kool_kombi 79 Active Member

    Messages:
    292
    Location:
    Brisbane
    Syncro27 likes this.
  2. kool_kombi 79

    kool_kombi 79 Active Member

    Messages:
    292
    Location:
    Brisbane
    tomhic and Mordred like this.
  3. kool_kombi 79

    kool_kombi 79 Active Member

    Messages:
    292
    Location:
    Brisbane
    I was able to do a little job for myself this weekend, a little artistic machining.

    With my old watch from over 20 years ago begging to be used I thought this job would suit him down to a tee.

    I used a few pieces from the off cut bin and away we went. The most difficult part was calculating the strange hole angle, good old trigonometry sorted that out.

    DSCN6218 15%.jpg DSCN6220 15%.jpg DSCN6221 15%.jpg
     
    David H and Barry like this.
  4. Barry

    Barry Well-Known Member

    Messages:
    1,919
    Location:
    Abbotsford NSW
    That's cool!
     
    kool_kombi 79 likes this.
  5. Alpal

    Alpal Moderator Staff Member

    Messages:
    8,015
    Location:
    Melbourne Bend of Islands
    Works for me. Timely addition to the Kombi!
     
  6. KahunaKombi

    KahunaKombi Super Moderator Staff Member

    Messages:
    17,287
    Location:
    Bracken Ridge, Qld
    Nice work ...... better than a blank face :D
     
  7. Jurgen Grossmutter

    Jurgen Grossmutter Active Member

    Messages:
    179
    Location:
    Ipswich
    Or a base flank
     

Share This Page