1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Powering a dash clock

Discussion in 'Fuel System & Electrics' started by okymura, Jul 6, 2011.

  1. okymura

    okymura Member

    Messages:
    85
    Location:
    Adelaide, SA
    Where is the best place to source / connect the power for the dash clock? Anyone have a wiring diagram for the clock installation? This is for my 1974. Grey faced quartz model clock.
    Darren
     
    Last edited: Jul 6, 2011
  2. syncro

    syncro Well-Known Member

    Messages:
    10,371
    Location:
    Southern Highlands
    Run a red cable from fuse 9 to + on the clock (Interior light fuse)
    Run a brown cable to earth
    Pick up a grey/red from the speedo (or heater controls) and run it to the clock light.
     

Share This Page