Repairing rust in front baywindow kombi

Discussion in ''How To' & 'Handy Hints'' started by retro1, Jul 14, 2006.

  1. brookie

    brookie Guest

    How about a few pics and perhaps you may get some more suggestions
     
  2. Parras

    Parras Member

    Messages:
    57
    Location:
    Minnamurra
    Hi all,
    Just wondering if anyone has used a gasless mig welder to carry out rust repairs. I've only heard negative feedback on them. Also is the thickness of the kombi body panels
    1.2mm?
    Cheers
    Mick
     
  3. kbskombi

    kbskombi Member

    Messages:
    223
    Location:
    Howrah Tas
    Parras
    In the same boat m8 and very confused about mig some say gasless is ok for pannel work others .... well gas is the way to go. as for the pannel gauge i thought 20guage ( i made a pannel out of) looked to thick ???
     
  4. kym rochford

    kym rochford New Member

    Messages:
    15
    Location:
    adelaide
    yeoooooowww!!!! i hope my kombi was fixed like that! its the only place i didnt fix myself. great post.
    kymmy.
     
  5. poGo

    poGo Member

    Messages:
    158
    Location:
    Townsville
    Hello brisbane folk. I am in desperate need to do this repair on my windows in my Bay. I already have all the seals for following the repair. What I require is some advice and/or maybe some help. I will gladly provide a carton to any Brisbane folk keen to do a weekend Job sometime.

    Cheers,

    Hamish
     

Share This Page