Urgent T3 Part

Discussion in 'T3 & T4 Tech Help Clinic' started by Peter Oberegger, Jan 1, 2018.

  1. Peter Oberegger

    Peter Oberegger Member

    Messages:
    37
    Location:
    Melbourne
    Need a fuel pressure control valve, vacuum thingy .
    Located Melbourne or surrounds

    Pedro
     
  2. Grantus

    Grantus Well-Known Member

    Messages:
    13,713
    Location:
    Southern ACT
    I returned a borrowed one to Scott (Syncro27)..... he may still have it? :rolleyes:
     
  3. Peter Oberegger

    Peter Oberegger Member

    Messages:
    37
    Location:
    Melbourne
  4. Luckyphil

    Luckyphil Well-Known Member

    Messages:
    5,294
    Location:
    Gosford
    Hey Peter whats happening with the motor and why do you suspect the fuel pressure regulator.
     
  5. kleinersyncro

    kleinersyncro Active Member

    Messages:
    169
    Location:
    Melbourne VIC
    Phil,

    Got fuel is mixing into the oil and engine stalls all the time.
    Also got a slightly taste of fuel in the vacuum one to the pressure regulator.
    Apart of fuel in oil, engine is running fine.

    Cheers Arne
     
  6. Peter Oberegger

    Peter Oberegger Member

    Messages:
    37
    Location:
    Melbourne
    What Arne said, he's borrowed mine so now I need one
    Cheers
     
  7. Grantus

    Grantus Well-Known Member

    Messages:
    13,713
    Location:
    Southern ACT
    I borrowed and fitted Scott’s, but it didn’t solve the issue, so I think I gave him back my original working extracted one...:confused:

    I love the way so many KC T3’s are now comprised of each other’s bits.....

    For example: I know my current SC dash is from Nil’s original white Velle, and the original SC dash was modified and now in Luckyphil’s bus. :D
     
    BUS_TER likes this.
  8. Gerry and Robyn

    Gerry and Robyn Active Member

    Messages:
    546
    Location:
    Lilydale Vic. Australia
    There's nothing like expanding the Gene Pool, I say.
     
    BUS_TER likes this.
  9. Grantus

    Grantus Well-Known Member

    Messages:
    13,713
    Location:
    Southern ACT
    Are you still sporting my SC bullbar? :rolleyes:
     
  10. Gerry and Robyn

    Gerry and Robyn Active Member

    Messages:
    546
    Location:
    Lilydale Vic. Australia
    Nope..........you gotta spread that luuv.
     
  11. Grantus

    Grantus Well-Known Member

    Messages:
    13,713
    Location:
    Southern ACT
    Absolutely..........well done! ;)
     
  12. Peter Oberegger

    Peter Oberegger Member

    Messages:
    37
    Location:
    Melbourne
    Well spread the love with a fuel pressure control valve please lol
     
  13. Gerry and Robyn

    Gerry and Robyn Active Member

    Messages:
    546
    Location:
    Lilydale Vic. Australia
    Hi Peter........sorry to hijack your thread.
    I have a spare working Fuel Regulator.
    I'm not sure if it's the same thing you're after.
    The part that I swapped for is GoWesty 0-280-160-205.
    So, I still carry the working original, which you could borrow to get you out of trouble.
    Mob 0438 303 270
     
  14. Peter Oberegger

    Peter Oberegger Member

    Messages:
    37
    Location:
    Melbourne
    All in good humour, I appreciate that
    I'll check with Arne that it has solved his problem and give you a call.
    Thanks
     
  15. Syncro27

    Syncro27 Well-Known Member

    Messages:
    5,649
    Location:
    Terrigal, NSW Central Coast
    Hi Peter.

    I am am sure I still have one. PM me your address and I will see what the postal service says on cost.

    Cheers.
     
  16. Syncro27

    Syncro27 Well-Known Member

    Messages:
    5,649
    Location:
    Terrigal, NSW Central Coast
    After a bit of searching in my box of goodies I found the little bugger.

    Let me know if you still need it....
     

Share This Page