Greg Van Zelst doing the repairs & Camoflauge paint on ECLECTIC.[IMG]
kombi is on 4 wheels 1st time in 5 years. lift indicator the milk crate. I started the mods on the doors today to fit 1 piece glass. I have new...
CBUS get your bum over here & show me the right way to do it Please
Ok let me ask as I'm out of my depth with all this info. If I tin & solder the steel band the tin & solder the copper ring to it should it be ok once...
Thanks David failed science. what about solder between them & lead wiped finish on top or powdercoated
Evening David I will find out about that. If that's the case i will get it chromed or cad plated. Please explaaaiiinn the nobility bit to me
I made these up to fit 90 degree black steel elbows onto to form the slider bars. these will be held in with a bolt from underneath with a nut welded...
I rolled a length of 25mm copper tube to form a dress band on the steel rod to give it size. I will be soldering it into place.
I bought a flange today to use for the rim retainer. I cut up & lengthened the Subaru tow pin then welded anut onto the 10mm plate to fit...
Hi alll can anyone tell me why photos have disappeared
Good afternoon Saabman yrs they just seem to disappear.
Can someone explain why my photos disappear off my post please
boxing the rails under the cargo floor. for peace of mind that it replaces what i cut out along with the cradle supports. I used 35 mm X 100 mm cut...
Separate names with a comma.