See if you can locate the brake booster hose as well (it's around a 13mm hose from memory on the type 1 which runs off the left intake manifold and...
Check your fuel lines as well - where they connect to the carb is generally a brass pressed tube (on a 34 PICT 3 anyway). If this has come loose it...
Ah of course, I had seen that one! Looks good Mark. is that the 2.5 x 2.5? I think you've sold me.
Really....... What sort of awning Mark? Do you have to support the pop top, and did you bolt straight on or is there a bracket? It would definitely...
Thanks Rob, yeah that will definitely crush my gutters. How do you go with rain if you've got the top up Mark? I really wanted a setup where I could...
That's hectic Brian. I know JK do have some in stock. The T3 ones look like they deform the gutters on a T2 pretty badly Peter. That's why I'm...
Thank's David. I did see those - I'm a bit torn there as well. I really want to try to keep the awning low so I can have the sliding door open, and...
Yeah, exactly. I just don't want to drill the side of the bus for an awning :/ It also looks like they've based theirs of the fiamma "t2/t3" which by...
Or anyone just installed one period? There are two different types, and an eezi awn adapter available (plus the gowesty modified ones) as far as i'm...
I've been looking at the never ending awning options for a 73 Sopru. I understand that this bracket:...
Just an update. Still using one of the originals I printed in 2016 without issue. Dropped the $ to more or less cost on shapeways and have a couple...
Hi all, Anyone installed an anchor point in the front in Queensland? The bus is registered as a two seater which means you can legally have a...
The oil may have leaked out of the coil and overheating? It's not an expensive place to start but sounds like a possibility. I believe if you give...
These are now in the shapeways marketplace: http://shpws.me/N3LB I have 4 complete with fastenings which are also available via PM.
[MEDIA] I used this in white. Took a few cans to do the whole roof. Came up really good - I mentioned in a post the other day that I repaired a...
Just a thought - have you had a look at your plugs? You might find the change in temperature / humidity is causing your air-fuel ratio to go out and...
I used that clear stretchy adhesive repair patch stuff you can get from an outdoors place (I think it's for tent repairs - super sticky. Then used...
There is a wavy spring washer in the assembly from memory, I seem to recall using the jack to hold the center pin in place installing. I don't think...
Was just re-reading Oldman's post and had a flashback... There's a sticky somewhere here on fireproofing your kombi. Read it if you haven't...
Check the metal fuel line that runs through the engine bay tin on the Left side. There's supposed to be a grommet there which is likely long gone....
Separate names with a comma.
