you could cut into the extension lengthwise with a dremel or carefully with an angle grinder to get it off
or you could just cut it off at the...
Hi Ian, yeah, I leave them a bit open - you can adjust your fast idle rod to suit so you don't stall at the first intersection you come to. Just need...
probably needed to solve the problem of silt and leaves clogging the drain
Hi Tony, It's sold as either a hot start or hard start relay. Patrick
it could be the solenoid or it could be the ignition switch. You can bypass the wires to the ignition switch to check. I use a wire with a...
Hi Justin - I know you have a 1.8l engine but considering the year model you might still have a 6 rib gearbox (from a 2 litre). Best to post a pic of...
you would only need a new bellhousing (correct one) but a bit of welding would probably do
some photobombs (or photoshops?)
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
not a fan of copycats
If they are AMC heads then gaskets aren't required - and you don't need to shim to make up for it because they have an extra step in them
I've always used Castrol GTX 20w-50 in Kombis
otherwise you can make up a piece of angle with a hole in it and screw/weld/rivet that in
Separate names with a comma.