1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

2L stud has cracked the block, HELP?

Discussion in 'Engine & Transmission' started by Jim981, Nov 10, 2014.

  1. Jim981

    Jim981 Member

    Messages:
    57
    Location:
    Cooranbong
    Just a close look at the inside of my 2block. Found the stud that holds the oil intake in place in the sump has a crack running up the side of it. There is also a large deposit of Kneed-it putty or similar up inside the recess on top of the sump, on the outside of the case.

    Can this crack be welded up, or filled in and re drilled? Looks like an easy repair, but most of the rebuild so far has "looked easy enough".....
    Thoughts, experience, etc welcome here.
    James
     

Share This Page