1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

How to replace centre pin for steering.

Discussion in ''How To' & 'Handy Hints'' started by MY74VW, Jun 16, 2007.

  1. Stormin12345

    Stormin12345 Member

    A brilliant post that gave me the confidence to tackle this job successfully this weekend. I used a M12x90mm coach bolt from Bunnings that I had to grind down a bit (in fact I did two as I ground down the first one too much!) as I couldn’t source the imperial bolt specified. Worked a treat, and I pushed bottom and top bush out with it. Hopefully when I get the Kombi on the road will make all the difference to steering.
    David H and melissa like this.

Share This Page